Drygoods ... Test Kits ... Seachem Laboratories ...

Seachem Laboratories Test Kits

Products

Seachem Multitest: Marine Basic Test Kit

	SeaChem Multitest: Marine Basic Test Kit This kit combines the Marine pH & Alkalinity, Ammonia and Nitrite & Nitrate kits into one kit. (pH, alkalinity, free/total ammonia, nitrite, nitrate Multi Test Kit)
Seachem Multitest: Marine Basic Test Kit - $34.99

Seachem Multitest: Reef Special Test Kit

	SeaChem Multitest: Nitrite & Nitrate Test Kit This kit combines the Phosphate, Silicate, and Iodine/Iodide kits into one kit. (phosphate, silicate, iodide Multi Test Kit) * multi-cavity plate for simultaneous testing of up to 6 tests at the same time * includes reference for test validation * Range: phosphate 0-3 mg/L, silicate 0-25mg/L, iodine/iodide 0-0.1 mg/L * Precision: phosphate 0.001-0.1 mg/L, silicate 0.1-1 mg/L, iodine/iodide 0.0025-0.005 mg/L
Seachem Multitest: Reef Special Test Kit - $34.99

Seachem Multitest: Ammonia Test Kit

	SeaChem Multitest: Ammonia Test Kit This kit measures total (NH3 and NH4+) and free ammonia (NH3 only) down to 0.05 mg/L and is virtually interference free in marine and fresh water. Free ammonia is the toxic form of ammonia (vs. ionized Ammonia NH4+ which is non-toxic) and thus it is much more important to keep an eye on the level of free ammonia in your system. This kit is based on the same gas exchange technology that is used in the Ammonia Alert and thus is the only kit on the market that can read levels of free ammonia while using ammonia removal products such as Prime, Safe, AmGuard and any similar competing products. The other kits (salicylate or Nessler based) determine the total ammonia by raising the pH of the test solution to 12 or greater. At this high pH all ammonia removal products will breakdown and rerelease the ammonia, thus giving you a false ammonia reading. * multi-cavity plate for simultaneous testing of up to 6 tests at the same time * sensor based, sensitive to less than 0.01 mg/L * includes reference for test validation * marine or fresh water * Range: 0.0 - 6.0 mg/L * Precision: 0.01 - 0.1 mg/L
Seachem Multitest: Ammonia Test Kit - $16.99

Seachem Multitest: Copper Test Kit

	SeaChem Multitest: Copper Test Kit This kit measures copper (all types) down to 0.01 mg/L in marine or freshwater. Uses a highly sensitive catalysis based procedure. * multi-cavity plate for simultaneous testing of up to 6 tests at the same time * catalysis based, sensitive to less than 0.01 mg/L * includes reference for test validation * marine or fresh water * Range: 0.0 - 0.80 mg/L * Precision: 0.0025 mg/L & 0.025 mg/L
Seachem Multitest: Copper Test Kit - $16.99

Seachem Multitest: Iodine & Iodide Test Kit

	SeaChem Multitest: Iodine & Iodide Test Kit This kit measures iodine or iodide to less than 0.005 mg/L. Seachem stands alone in offering this important test to the reef aquarian. * multi-cavity plate for simultaneous testing of up to 6 tests at the same time * catalysis based, sensitive to less than 0.0025 mg/L * includes reference for test validation * marine or fresh water * Range: 0 - 0.1 mg/L * Precision: 0.0025 - 0.005 mg/L
Seachem Multitest: Iodine & Iodide Test Kit - $17.99

Seachem Multitest: Iron Test Kit

	SeaChem Multitest: Iron Test Kit This kit measures iron in freshwater or marine water to less than 0.05 mg/L. Can also measure chelated iron. * multi-cavity plate for simultaneous testing of up to 6 tests at the same time * sensitive to less than 0.05 mg/L * includes reference for test validation * marine or fresh water * Range: 0.0 - 2.0 mg/L * Precision: 0.05 mg/L
Seachem Multitest: Iron Test Kit - $16.99

Seachem Multitest: pH & Alkalinity Test Kit

	SeaChem Multitest: pH and Alkalinity Test Kit This kit combines the pH and Alkalinity kits into one kit. This kit features a unique dye that has a pronounced color change between 8.0 to 8.3, making it the easiest kit on the market to read in that critical range. Alkalinity may be read from the same sample in 0.5 meq/L increments. * multi-cavity plate for simultaneous testing of up to 6 tests at the same time * includes reference for test validation * Range: pH:7.80-8.70, alkalinity 0- infinity * Precision: pH: 0.01 pH units, alkalinity 0.5 mgq/L
Seachem Multitest: pH & Alkalinity Test Kit - $16.99

Seachem Multitest: Nitrate & Nitrite Test Kit

	SeaChem Multitest: Nitrite & Nitrate Test Kit This kit combines the Nitrite and Nitrate kits into one kit. * multi-cavity plate for simultaneous testing of up to 6 tests at the same time * sensitive to less than 0.2 mg/L * includes reference for test validation * marine or fresh water * Range: 0-25 mg/L (nitrite), 0-50 (nitrate) * Precision: 0.1 - 1 mg/L
Seachem Multitest: Nitrate & Nitrite Test Kit - $16.99

Seachem Multitest: Phosphate Test Kit

	SeaChem Multitest: Phosphate Test Kit This kit measures inorganic phosphate down to 0.05 mg/L, producing a unique easy to read yellow-green-blue color range in marine and freshwater. * multi-cavity plate for simultaneous testing of up to 6 tests at the same time * sensor based, sensitive to less than 0.05 mg/L * includes reference for test validation * marine or fresh water * Range: 0.0 - 3.0 mg/L * Precision: 0.001 - 0.1 mg/L
Seachem Multitest: Phosphate Test Kit - $16.99

Seachem Multitest: Silicate Test Kit

	SeaChem Multitest: Silicate Test Kit This kit measures silicates down to 0.5 mg/L in marine or freshwater. * multi-cavity plate for simultaneous testing of up to 6 tests at the same time * sensitive to less than 0.5 mg/L * includes reference for test validation * marine or fresh water * Range: 0 - 25 mg/L * Precision: 0.1 - 1 mg/L & 0.01 - 0.1 mg/L
Seachem Multitest: Silicate Test Kit - $16.99

Seachem Reef Status: Calcium Test Kit

	SeaChem Reef Status Calcium Test Kit This kit measures all types of calcium, including gluconate calcium. The method is based on specific titration with a unique indicator. * 150 titration tests for calcium * rapid & simple 3 step procedure * sharpest endpoint * precise to 5 mg/L * includes reference validation * designed for the reef aquarist
Seachem Reef Status: Calcium Test Kit - $29.99

Seachem Reef Status: Strontium Test Kit

	SeaChem Reef Status Strontium Test Kit This kit measures strontium by first seperating the strontium in the sample by a chemical precipitation and filtration, followed by a sensitive titration in 0.5 mg/L increments. Now uses an easier to read non-fluorescent indicator! * 50 titration tests for strontium * only 10 minutes per test! * new isolation procedure * precise to 0.5 mg/L * includes reference validation * designed for the reef aquarist
Seachem Reef Status: Strontium Test Kit - $42.99

Seachem Reef Status: Magnesium, Carbonate, Borate, Alkalinity Test Kit

	SeaChem Reef Status Magnesium Testing (includs tests for Borate and Carbonate) Four kits in one! Tests for magnesium through a titration based procedure in increments of 12.5 mg/L. Tests for carbonate alkalinity, borate alkalinity and total alkalinity in 0.1 meq/L resolution through a titration based procedure. The kit resolves borate from carbonate and, along with magnesium, this presents a clear picture of the tank`s buffering capacity as well as a very reliable determination of the critical carbonate content required for coral and coralline growth. * 75 titration tests each for borate, carbonate & magnesium * directly measures magnesium * resolves carbonate and borate * interference free * includes reference validation * designed for the reef aquarist
Seachem Reef Status: Magnesium, Carbonate, Borate, Alkalinity Test Kit - $30.99

Seachem Ammonia Alert

	Ammonia Alert is an innovative color device for continuously detecting and monitoring toxic free ammonia. A sensor changes reversibly from yellow to green to blue, relative to the ammonia concentration. No test kits, chemicals, or procedures are needed. The device detects less than 0.05 mg/L (ppm) free ammonia and alerts you to the #1 killer before any sign of stress. It lasts over a year and replacement sensors are available. Marine or freshwater use. In the absence of free ammonia the unit will assume a yellow or faint yellow-green color. It is normal for the dry sensor to have a greenish hue. It may take up to a few days for a dry sensor to equilibrate with the water. No sampling of water, chemicals, or test procedures are required. The presence of the free ammonia is detectable continuously with a response time of about 15 minutes. Response to decreasing ammonia is slower, requiring about 4 hours to go from TOXIC to SAFE on removal of ammonia.
Seachem Ammonia Alert - $6.99